eBay Classifieds » All ads » For sale » 

Business & industrial in Brattleboro

(1-24 of 537 ads)

View as:
Categories
Price [clear]
$ to
  1. Sponsored Link 5
  2.  
  1. Okuma 46" x 246" Engine Lathe

    1980 Okuma 46" x 246" Engine Lathe Swing Over Ways: 46" Swing Over Cross Slide: 36 " Distance Between Centers: 246" Spindle Speed: 12~1,000 rpm Spindle Bore: 3" Chuck Diameter: 36" Number of Jaws: 4 Equipped With- 36" 4-Jaw Chuck 22" Steady Rest 15" Steady Rest Inch/Metric Threading Taper Attachment

  2. 1996/2007 Mitsubishi FX-10 (CNC Wire Type EDM)

    1996/2007 Mitsubishi FX-10 CNC Wire Type EDM Control: Mitsubishi Maximum Workpiece Weight: 1,168 lbs Maximum Workpiece Size: 31.49" x 22.63" x 8.66" Machining Stroke ( X x Y x Z ): 13.77" x 9.84" x 8.66" Table Size: 24.80" x 20.86" Taper Capacity: 15 Degrees +/- in 4" Maximum Amperage: 40 Amps Approximate Dimensions: 92" x 91" x 90" Approximate Machine Weight: 4070 Lbs Equipped with- AF3 Autothreader Submerged Cutting .004" & .006" Dia Wire Kit Advance Hand Pendant Front Rail ...

  3. Tos SN 50 C  (Engine Lathe)

    Tos SN 50 C Manual Engine Lathe Swing over bed: 20” Swing over carriage: 10.6” Spindle bore: 2-1/8” Center distance: 80” Voltage: 220/3/60 Horse power: 7.5 Equipped With- Digital Read Out Tail Stock More Info: http://www.2spade.com/TosSN50C.html

  4. Verson S2-300-96-48  (300 Ton Press)

    Verson S2-300-96-48 Manual Press Capacity: 300 Tons Stroke: 18" Adjustment: 8" Shut Height: 30" Windows: 38” x 30” High Speed: 20-40 SPM Equipped With- Bolsters ***TWO OF THESE IDENTICAL MACHINES AVAILABLE*** More Info: http://www.2spade.com/VersonS2-300-96-48.html

  5. PMW 26 x 32 Heated Parts Washer

    PMW Parts Washer Heated Parts Washer Table Diameter: 26" Work Height: 32" Part Weight Capacity: 500 Lbs. Pump Motor HP: 3 HP More Info: http://2spade.com/PMW.html

  6. 1999 TSUGAMI BS32 CNC TURNING CENTER

    1999 TSUGAMI BS32 CNC TURNING CENTER MODEL: BS32-C MARK II CONTROL: FANUC LH-1 MAXIMUM BAR DIAMETER: 1 1/4" Z1-AXIS TRAVEL (SYNCHRONOUS TO "Z2"): 9.75" MAIN SPINDLE: SPINDLE SPEED: 200 TO 7,000 RPM INDEXING: FULL C-AXIS (.001 DEGREE) PROGRAMMABLE SERVO AXIS DESIGNATIONS: "Z1" MAIN HEADSTOCK IN AND OUT: 9.75" "T1" O.D. TOOL SLIDE UP AND DOWN: 11.6" "X1" O.D. TOOL SLIDE RIGHT AND LEFT: 2.28" "X2" I.D. TOOL SLIDE UP AND DOWN: 8.66" AUXILIARY SLIDE MOTION: "Z2" I.D. TOOL SLIDE IN ...

  7. 1968 Verson 150-B2-72 (SSDC Press)

    1968 Verson 150-B2-72 Straight Side, Double Crank Press Capacity: 150 Tons Stroke: 8" Shut Height: 18" Bolster: 4.5" Bed Size: 48" X 76" Spindle Speed: 40 - 2000 RPM Ram Speed: 40 SPM -EQUIPPED WITH- Air Clutch Egan coil cradle and straightner P.R.E. air feeder More Info: http://2spade.com/1968Verson150B272.html

  8. 1999 Kira KN40Va (Vertical Machining Center)

    1999 Kira KN40Va Vertical Machining Center Control: Fanuc 21i-M X-Axis Travel: 19.7” Y-Axis Travel: 13.8” Z-Axis Travel: 15.8” Table Size: 23.6" x 13.8" Spindle Nose to Table Top: 5.9” – 21.7” Spindle Center to Column: 16.9” Maximum Table Weight: 220 LBS Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 10 HP Rapids Traverse (XY / Z): 1890 / 1417 IPM Cutting Feed Rate (XYZ): 394 IPM Tool Capacity: 12 ATC Max. Tool Diameter: 3.9” Max. Tool Length: 9.84” Max. Tool ...

  9. 1999 Behringer HBP-430A (Dual Post Band Saw)

    1999 Behringer HBP-430A Dual Column Horizontal Band Saw Cutting Capacity (Round): 17" Cutting Capacity (Rectangle): 17" x 17" Saw Blade Dimensions: 19'0" x 2" x .063" Working Height: 27.6" Drive Motor Power: 7.4 HP Blade Speed Range: 65 ~ 426 SFM Stroke Feed Length: 23.6" Max Feed Length: 212.6" Band Wheel Diameter: 24.8" Diameter Of Columns: 5.9" Machine Dimensions: 119"L x 87"W x 80"H Machine Weight: 7,500 LBS -EQUIPPED WITH- Hydraulic Blade Guide Clamping Automatic Movable ...

  10. 2003 Mori Seiki RL-203 (CNC Turning Center)

    2003 Mori Seiki RL-203 Twin Spindle Turning Center With Gantry Control: MSG-803 Chuck Size: 8" (2) Max Diameter Bar Capacity: 2" Max Swing Over Bed: 13.1" Max Turning Diameter: 9.4" / 7.8" Max Machining Length: 5.9" Tools: 8 (2) Spindle Motor: 15 / 10 HP AC (2) Spindle Speed: 45 - 4500 RPM Spindle Bore: 2.4" Spindle Nose: A2-6 Rapid Traverse Rates: 945 IPM X-Axis Travel: 5.1" Z-Axis Travel: 5.9" Turret Index (Single Step): 0.8 Seconds Machine Dimensions (L x W x H): 92.6" x 77.4" x ...

  11. 1997 Mazak FH-49X
    Please Contact

    1997 Mazak FH-49X Horizontal Machining Center Control: Mazatrol M-Plus Pallet Width: 15.75" Pallet Length: 15.75" No. of Pallets: 2 Indexing: 1 deg Maximum Load Capacity: 880 lbs X-Axis Travel: 22.05" Y-Axis Travel: 22.02" Z-Axis Travel: 20.05" Spindle Speeds: 35 ~ 12,000 rpm Spindle Taper: CAT 40 Spindle Drive Motor: 30 hp Tool Changer: 30 atc -EQUIPPED WITH- Coolant Thru Spindle Rigid Tapping Auto Tool Length Measurment User Macro Monitoring System B(Prep) Tool Life ...

  12. 1988 FSP M-80 (Clamshell Style Rotational Molder)

    1988 FSP M-80 Clamshell Style Rotational Molder Number Of Arms: 1 Max Swing Diameter - Straight Arm (inches): 94" Max Load - Straight Arm: 2,000 LBS Space Required (L x W x H ): 18.1' x 11.6' x 8.9' Burn Capacity: 2,800,000 BTU/hr Heat Source: Natural Gas Electrics: 460v - 3ph More Info: http://2spade.com/1988FSPM80.html

  13. 2010 Ecotech HK248/6500 (CNC Cylindrical Grinder)

    2010 Ecotech HK248/6500 CNC Plain Cylindrical Grinder Control: Fanuc Max Working Diameter: 25" Max Part Length: 255" Center Height: 19.6" Max Worpiece Weight: 13,236 LBS Wheel Head Power: 25 HP Wheel Size: 30"Dia x 3"ID x 12"W Wheel Speed: 1,146 RPM Wheel Head Traverse: 315" Wheel Head Plunge: 20" Workhead Power: 20 HP Workhead Taper: 100 Metric Tail Stock Taper: 100 Metric Tail Stock Quill Travel: 3.9" Machine Dimensions: 501"L x 103"W x 90"H Machine Weight: 75,500 LBS More Info ...

  14. 2010 Timesavers 3331-05-333 SP (Automatic Orbital Sander)

    2010 Timesavers 3331-05-333 SP Automatic Orbital Sander Width Capacity: 52" Number of Heads: 3 1st Head: 15 HP single pad orbit 2nd Head: 15 HP single pad orbit 3rd Head: 15 HP single pad orbit -EQUIPPED WITH- Centralized control panel Spring loaded hold down rolls on infeed, outfeed and between heads Vacuum bed Motorized table height adjustment Auto set up device Four bed jacks Main motor load meters More Info: http://2spade.com/2010Timesavers333105333SP.html

  15. 1998 Daewoo ACE H-80 (Horizontal Machining Center)

    1998 Daewoo ACE H-80 Horizontal Machining Center Control: Fanuc 16M Pallet Size: 31.5" x 31.5" Number of Pallets: 2 Pallet Indexing: 1° Maximum Pallet Load: 4,400 lbs X-Axis Travel: 49.2" Y-Axis Travel: 39.4" Z-Axis Travel: 39.4" Spindle Speeds: 20-4,500 rpm Spindle Taper: CAT 50 Main Motor: 30 hp Tool Changer Positions: 120 atc -EQUIPPED WITH- Thru Spindle Coolant Chip Conveyor More Info: http://2spade.com/1998DaewooACEH80.html

  16. 1990 OKK PCV-40 (Vertical Machining Center)

    1990 OKK PCV-40 Vertical Machining Center Control: Mitsubishi Meldas 320 X Axis Travel: 22" Y Axis Travel: 16" Z Axis Travel: 16" Table Size: 28" x 16" Max Table Load: 660 LBS Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 10 HP Tool Capacity: 18 ATC -EQUIPPED WITH- USB Reader 30 Extra CAT 40 Tool Holders ***Machine Was Used For Cutting Plastic Only*** More Info: http://2spade.com/1990OKKPCV40.html

  17. 1988 Leadwell MCV-0 (Vertical Machining Center)

    1988 Leadwell MCV-0 Vertical Machining Center Control: Fanuc 0M X Axis Travel: 18" Y Axis Travel: 14" Z Axis Travel: 14" Table Size: 25.6" x 13.8" Spindle Taper: BT 40 Spindle Speed: 6,000 RPM Spindle Motor: 5 HP Tool Capacity: 16 ATC -EQUIPPED WITH- 128K Memory Upgrade 30 Extra BT 40 Tool Holders **Machine Only Cut Aluminum** More Info: http://2spade.com/1988LeadwellMCV0.html

  18. 1994 Bridgeport V2XT (CNC Knee Mills)

    1994 Bridgeport V2XT CNC Knee Mill Control: Bridgeport DX-32 X Axis Travel: 30" Y Axis Travel: 12" Z Axis (Quill) Travel: 5" Knee Travel: 14.5" Table Size: 9" x 48" Max Table Load: 300 LBS Head Tilt: +/- 90 Degrees Spindle Speeds: 60-4,200 RPM Spindle Taper: #30 QC Spindle Motor: 2 HP Machine Dimensions: 72"L x 60"W x 92"H Machine Weight: 3,000 LBS **Two Identical Machines Available** ***Machines Never Used In Production*** More Info: http://2spade.com/1994BridgeportV2XT.html

  19. 1993 Mazak H-400N (Horizontal Machining Center)

    1993 Mazak H-400N Horizontal Machining Center Control: Mazatrol M-32 x Axis Travel: 22.05" Y Axis Travel: 20.08" Z Axis Travel: 20.08" Number of Pallets: 2 Pallet Size: 15.75" x 15.75" Max Pallet Load: 880 LBS Pallet Degree of Index: 1 Degree Spindle Taper: 40 Spindle Speed: 15,000 RPM Spindle Motor: 15 HP Tool Capacity: 30 ATC Machine Dimensions: 151.6"L x 98"W x 95.6"H Machine Weight: 18,700 LBS -EQUIPPED WITH- All Available Books & Manuals Rebuilt 15,000 RPM Spindle In 2011 ...

  20. 2000 Okuma IMPACT LU-15 (CNC Turning Center, 4 Axis)

    2000 Okuma IMPACT LU-15 CNC Turning Center, 4 Axis Control: OSP-U100L Chuck Size: 8" Swing over Bed: 20.87" Swing over Carriage: 14.96" Swing over Crosslide: 12.99" Maximum Cutting Diameter: 14.17" Maximum Turning Length: 23.62" Spindle Nose: A2-8 Spindle Bore: 2.44” Spindle Speed Range: 75 - 4500 rpm Spindle Motor: 30 HP Turret Type: Twin Turret -v12 +v8 Turret Positions: 12 + 8 Machine Size: 160" x 82" x 76"H Machine Weight: 14,500 lbs -EQUIPPED WITH- Tailstock Chip Conveyor ...

  21. 2006 Romi M 20 (CNC Tool Room Lathe)

    2006 Romi M 20 CNC Tool Room Lathe Control: Fanuc 21i-T Swing Over Bed: 20" Swing Over Cross: 10" Centers Distance: 62" x Axis Travel: 11" z Axis Travel: 60" Spindle Hole: 2.5" Spindle Nose: A2-6 Spindle Speeds: 2,200 RPM Spindle Motor: 15 HP Number of Turret Postions: 8 Electrics: 230 V, 3 PH, 50/60 HZ Approx Dimensions: 143"L x 65"W x 65"H Machine Weight: 7,750 LBS -EQUIPPED WITH- Tail Stock 8 Position Turret Extra 15", 3 Jaw Chuck Feature Cam 2006 More Info: http://2spade ...

  22. 2008 Empire CTT96-RS2 (Rotary Blasting Machine)

    2008 Empire CTT96-RS2 Rotary Blaster Number of Rotary Blasting Heads: 2 Number of Suction Blast Guns: 9 (per each head) Turntable Diameter: 96" Max Turntable Load: 1,000 LBS Media Storage Hopper Capacity: 4 cu ft Air Requirements: 756 CFM at 80 PSI -EQUIPPED WITH- Heavy Duty Blast Enclosure, 1/4" Thick Steel 1/4" Thick Neoprene Rubber Interior Lining Saftey Ladder And Railing NEMA-12 Electrical Enclosure With Controls (460/60/3) Technical Doumentation More Info: http:/ ...

  23. 1989 Hitachi H-CUT203M (CNC Wire Type EDM)

    1989 Hitachi H-CUT203M CNC Wire EDM Control: Fanuc SP150 (System H-F) X-Axis Travel: 12" Y-Axis Travel: 10" Z-Axis Travel: 6" Max Workpiece Dims: 17"L x 13"W x 6"H Max Workpiece Weight: 440 LBS -EQUIPPED WITH- Programmable U & V axes (taper cutting) Automatic Wire Feed More Info: http://2spade.com/1989HitachiHCUT203M.html

  24. 2012 Haas VF-3YT/50 (Vertical Machining Center)

    2012 Haas VF-3YT/50 Vertical Machining Center Control: Haas X Axis Travel: 40" Y Axis Travel: 26" Z Axis Travel: 25" Table Size: 52" x 23" Max Table Load: 4,000 LBS Spindle Taper: CAT 40 Spindle Speed: 7,500 RPM Spindle Motor: 30 HP Tool Capacity: 30 ATC Machine Dimensions: 156"L x 102"W x 125"H Machine Weight: 14,620 LBS More Info: http://2spade.com/2012HaasVF3YT50.html